PERHITUNGAN STRUKTUR RENCANA GEDUNG REKTORAT UNIVERSITAS 17 AGUSTUS 1945 SAMARINDA

HESTU PURNOMO AJI

Abstract


At this time the construction of multi-storey building has become a top priority for both the private sector and government. It is very closely related to the limitations of available land and high land prices in major cities as a result of rapid population growth. The plan of University Rectoral Building of 17 Agustus 1945 in Samarinda has basic planning concept that relates directly to the knowledge in the field of civil engineering. In this thesis calculating rector building structure including with 13 basements by using the required regulations and applicable in Indonesia, such as: ISO 1727-2013 ISO 1727-2013 on Minimum Load For Designing Buildings and Other Structures, and ISO 2847-2013 on Requirements for Structural Concrete Building. From the calculation of the structure using two methods, namely Matrix and software tools SAP2000 obtained the greatest value from your bar = 96.653, Pu column = 28.751 tonnes. From the planning and calculations that have been done shows the dimensions and reinforcement of structural elements (beams, columns, plates and foundations) and plans figure of the structure of the Rectoral building.

Keywords


Analysis, Matrix, Reinforced concrete structures, SAP2000

Full Text:

pdf

References


Arroniri, M.R. Perencanaan alternatif Struktur Beton Bertulang Gedung Dekanat

Fakultas Teknik Universitas Brawijaya Malang Berdasarkan SNI 1726-

, Malang, Indonesia.

Asroni, Ali. 2010. Kolom Fondasi & Balok T Beton Bertulang, Yogyakarta :

Graha Ilmu.

Oktopianto, Yogi & Relly. Evaluasi Kinerja Struktur Beton Bertulang Dengan

Pushover Analysis, Vol. 5 Oktober 2013.

Pamungkas, Anugrah & Erny Hariati. 2013. Desain Pondasi tahan Gempa Sesuai

SNI 03-1762-2002 dan SNI 03-2847-2002. Yogyakarta : Andi.

Poerbo, Hartono. 2000. Struktur Dan Kostruksi Bangunan Tinggi, Jakarta :

Djambatan.

Pramono, Handi dan Rekan. 2007. Desain Konstruksi Plat & Rangka Beton

Bertulang Dengan SAP 2000, Yogyakarta : Andi.

Pornomo, Endi. Kajian Struktur Balok dan Pelat Beton Bertulang ”Gedung

Layanan Akademik Fakultas Teknik UNY” Berdasarkan SNI 03-2847-

, Universitas Negeri Yogyakarta.

Purwono, Rachmat. 2005. Perencanaan Struktur Beton Bertulang Tahan Gempa,

Surabaya : ITS Press.

Sarjono. Pondasi Tiang Pancang.

SNI 05-7052-2004, Syarat – syarat Umum Konstruksi Lift Penumpang yang

Dijalankan Dengan Motor Traksi Tanpa Kamar Mesin. Jakarta : BSN.

SNI 1727-2013, Beban Minimum Untuk Perencanaan Bangunan Gedung dan

Struktur Lain, Jakarta : BSN.

SNI 2847-2013, Persyaratan beton Struktural Untuk Bangunan Gedung, Jakarta :

BSN.

Suharjanto. 2013. Rekayasa Gempa ( Dilengkapi Dengan Analisis Beban Gempa

Sesuai SNI 03-1726-2002), Yogyakarta : Kepel Press.

Susastrawan. 1991. Analisis Struktur Dengan Cara Matriks, Yogyakarta : Andi.


Refbacks

  • There are currently no refbacks.


VOL 1. NOMOR 1. AGUSTUS 2012