PERBANDINGAN PERILAKU LENTUR BALOK NORMAL DAN BALOK BETON DENGAN PENAMBAHAN FLY ASH 10 % & 15 %

INDRA DIAN WAHYUDI

Abstract


Normal concrete is concrete that has a weight of 2200 - 2500 kg / m3 using natural aggregates were broken or without broken. Concrete is the construction material that most common in use and in demand because as a basic material that easily formed with the relatively cheap price compared with the other construction.
Mineral additive is added into the mix a lot of concrete with different goals, one of which could add to the strength of concrete. For that we need to know there is no research about it. This study used a mineral additive in the form of fly ash. To support the benefits of using alternative materials in the East Kalimantan province in the concrete mixture used material coming from the province of East Kalimantan, coarse aggregate of koral stone from Kaliorang and aggregate from the Mahakam river from the village of Loa Duri.
Mix design or composition of the concrete mix using methods (Comparison 1: 2: 3) in the test material using a coarse stone aggregate maximum of 40 mm. Reinforcement concrete
with Mahakam sand and cora as much as 6 sample, reinforcement concrete with added material of fly ash 10% as much as 6 sample, and reinforcement concrete with added material of fly ash 15% as much as 6 sample. As well as using the factors of age 14 and 28 days so the total sample of 36. From the test results flexural strength on the beam which uses a mixture and reinforcement at the age of 14 and 28 days above described acquired flexural strength to mix plain Mahakam sand and coral (fc): 19,111 kg / cm², a with added material of fly ash 10% (fc): 20,222 kg / cm², and a with added material of fly ash 15% (fc): 20,889 kg / cm².


Keywords


Concrete, Local Ingredients, Fly Ash, Strong Bending. 1)

Full Text:

pdf

References


Adi, A.S, 2014, Teknologi Beton, Diktat Kuliah Fakultas Teknik Universitas 17 Agustus 1945 Samarinda.

Febrianto, Muhammad Andi. 2016, Perilaku Lentur Balok Beton Bertulang Dengan Tulangan Rotan Dan Tulangan Besi Polos. Skripsi Jurusan Teknik Sipil Fakultas Teknik Universitas 17 Agustus 1945 Samarinda.

SNI-03-4154-1996, Metode Pengujian Kuat Lentur Beton dengan Balok Uji Serderhana yang Dibebani TerpusatLangsung, Badan Standarisasi Nasional (BSN), Bandung

SNI-03-2823-1992, Metode Pengujian Kuat Lentur BetonMemakai Gelagar Sederhana dengan Sistem Beban Titik di Tengah, Badan Standarisasi Nasional (BSN), Bandung

SNI-03-2834-2000, Tata Cara Pembuatan Rencana Campuran Beton Normal, BadanStandarisasi Nasional (BSN), Bandung

Standar Nasional Indonesia 1969:2008, Cara Uji Berat Jenis Dan Penyerapan Air Agregat Kasar.

Standar Nasional Indonesia 2493:2011, Tata Cara Pembuatan Dan Perawatan Benda Uji Beton Di Laboratorium, BSN 2011

Trimulyono, TeknologiBeton, Yogyakarta, 2004.

Tjokrodimuljo, Kardiyono., Teknologi Beton, Yogyakarta, 2007.

Wiratman Wangsadinata, 1970, Perhitungan Lentur Dengan Cara “n”,Departemen Pekerjaan Umum dan Listrik Direktorat Jendral Ciptakarya, ISSN 2354-8630, Bandung

Paul Nugraha, Teknologi Beton, Surabaya, 2007

Yunus, Alve. 2010. Kuat Tekan dan Kuat Lentur Beton dengan Bahan Tambah Fly Ash sebagai Bahan Perkerasan Kaku (Rigid Pavement). Skripsi Jurusan Teknik Sipil Fakultas Teknik Universitas Sebelas Maret Surakarta: Surakarta.

Sian, Buen, dkk. 2013. Uji Eksperimental Kuat Lentur Balok dan Plat Beton Bertulang dengan Agregat Kasar dan Halus Beton Daur Ulang. Bandung: Universitas Katolik Parayangan.

Rara, Dewi, W.S. 2013. Pmbuatan Beton Normal dengan Fly Ash Menggunakan Mix Desain yang Dimodifikasi. Skripsi Jurusan Teknik Sipil Fakultas Teknik Universitas Jember: Jember.

Philip, A.M, 2015. Pengaruh Penambahan Abu Terbang (Fly Ash) Terhadap Kuat Tarik Belah Beton (Jurnal). Manado: Universitas Sam Ratulangi.

Kultsum Ummi,2014, Kajian Kuat Lentur Balok Beton Bertulangan Bambu Wulung Takikan Tipe v Dengan Jarak 2 cm dan 3 cm, 2988-5558-1-sm,Surakarta


Refbacks

  • There are currently no refbacks.


VOL 1. NOMOR 1. AGUSTUS 2012